Development of a stability indicating high-performance liquid chromatography method for determination of cenobamate: study of basic degradation kinetics.

This study presents a stability indicating high-performance liquid chromatography HPLC method for the determination of cenobamate (CNB) in presence of its main impurity (CNB H-impurity) and degradation products. The chromatographic separation was carried out on a Thermo BDS Hypersil-C18 column (150 × 4.6 mm; 5 µm) with a mobile phase consisting of a 50:50 (%v/v) ratio of methanol and purified water. The flow rate was maintained at 1.0 mL. min- 1. CNB was detected at 210 nm using a PDA detector. The column temperature was held at 40 °C.The retention time of the drug was found to be 3.2 min. Furthermore, the study investigates the degradation behavior of CNB under various stress conditions, including acidic, basic, oxidative, and light-induced degradation. The results indicate that CNB is particularly susceptible to basic degradation. Consequently, a comprehensive study of the basic degradation kinetics was conducted. The method was also successfully applied for the determination of CNB in its dosage form. The results also show that there is no co-elution from degradation products or excipients as indicated by the mass balance and peak purity values confirming the specificity of the proposed method and its applicability for routine analysis of CNB.

Simple colorimetric paper-based test strip for point-of-use quality testing of ethanol-based hand sanitizers.

A novel, simple, affordable, and reliable colorimetric paper-based analytical device (PAD) was developed for the point-of-use quality testing of ethanol-based hand sanitizers, mainly against adulteration by water. The principle was based on the novel solvatochromism of methylparaben (MPB)-Fe3+ complex, where water is essential for complex formation and ethanol is necessary for MPB solubility. The intensity of the formed violet color, measured at 528 nm, showed a good correlation (R2 = 0.996) with the percentage water in the reaction media over a range from 40% to 100% (0-60% ethanol), with excellent accuracy and precision as indicated by the percent recovery within 100.00% ± 2% and %RSD of <2%. A PAD was prepared by the sequential immobilization of Fe3+ ions and MPB on chitosan-modified filter paper. The developed PAD was successfully applied for the quality testing of ethanol-based hand sanitizers using an established color index, where clearly distinct colors were observed as a function of the percentage ethanol (0-100%). The developed test strips could achieve on-site lab-quality results without expensive or sophisticated instruments using a few milligrams of FeCl3 and MPB in addition to regular filter paper. Accordingly, it can be used as a test strip for the quality checking of ethanol-based hand sanitizers by end users.

Antibacterial and antifungal activities of natural deep eutectic solvents.

The increasing antibiotic resistance towards a panel of microorganisms is one of the public health concerns. For this reason, the search for alternatives to the widely used antibiotic has been undertaken. In the era of sustainable chemistry, deep eutectic solvents (DESs) have emerged as promising antimicrobial agents. These solvents possess several advantages such as low volatility, low flammability, ease of preparation, and typically low cost of production. These properties make DES suitable for various applications, including extraction of biomolecules and preparation of cosmetics. Natural DESs (NADESs) are special category of DESs prepared from natural sources, which matched the recent trends of leaning back to nature, and decreasing dependence on synthetic precursors. NADES can be prepared by heating and stirring, freeze-drying, evaporation, grinding, and ultrasound-assisted and microwave-assisted synthesis. Utilizing NADESs as an alternative to traditional antibiotics, which become ineffective over time due to bacterial resistance, holds great promise for these reasons. This review aims to discuss the antimicrobial properties of multiple NADESs, including antibacterial and antifungal activities. To the best of our knowledge, this review is the first literature survey of the antimicrobial activities of NADESs. KEY POINTS: • Natural deep eutectic solvents are promising antimicrobial alternative to antibiotics • NADES holds high potential for their activity against bacterial resistance • NADES have also substantial antifungal activities.

A stability indicating RP-HPLC-UV assay method for the simultaneous determination of hydroquinone, tretinoin, hydrocortisone, butylated hydroxytoluene and parabens in pharmaceutical creams.

Multicomponent drugs are medications that combine two or more active pharmaceutical ingredients in a single dosage form. These dosage forms improve the patient compliance, reduce the risk of drug interactions, and simplify dosing regimens. However, quality control of these multicomponent dosage forms can be challenging, especially if the final product contains four or more ingredients that are active (comprise stabilizers, preservatives, excipients, and other components). This problem can be more pronounced if the excipients can interfere with the analysis. In this work, a stability indicating assay method was developed and validated (according to the ICH International Guidelines) for the simultaneous determination of hydroquinone (HQ), tretinoin (TRT), hydrocortisone (HCA), butylated hydroxytoluene (BHT), methyl paraben (MP) and propyl paraben (PP) in commercially available pharmaceutical creams. The proposed method is based on gradient elution using X-Bridge C18 (150 × 4.6 mm, 5 µm) column with a flow rate of 1 mL/min. The linear ranges (µg/mL) were 240-560 for HQ, 24-56 for MP, 132-308 for HCA, 6-14 for PP, 12-28 for BHT, 6.6-15 for TRT. During the validation process, the intra- and interday precision and trueness (evaluated as recovery) were found to be below 2.0% and between 100-102%, respectively. System suitability tests (SST) allow validating the herein proposed procedure specifically for pharmaceutical and industrial applications. SST test shows that the reported procedure fulfill with the Guidelines, allowing excellent separation of the analytes with very sensitive, accurate (precise and true) and reproducible quantitation of each analytes. The method was successfully applied in forced degradation studies of the six analytes. Specifically, acid degradation slightly affected HCA and BHT (91% recovery), while alkaline degradation drastically reduced HCA recovery (5.5%) and moderately affected BHT (85%). Photodegradation primarily influenced TRT quantity, and oxidative degradation intensified the BHT peak (130%).

Homogeneous liquid-liquid microextraction coupled with HPLC/DAD for determination of nirmatrelvir and ritonavir as COVID-19 combination therapy in human plasma.

The study reports the development of a high-performance liquid chromatography/diode array detection method to measure the levels of nirmatrelvir and ritonavir in human plasma. These two antiviral medications are used for the treatment of COVID-19 and are marketed as Paxlovid®. The method employed sugaring-out induced homogeneous liquid-liquid microextraction to improve sensitivity. Optimization of the method was performed using the one variable at a time approach by adjusting several factors such as type of sugar, extractant, amount of sugar, volume of extractant, and pH of the aqueous sample to achieve the highest efficiency. The developed method was validated according to the Food and Drug Administration guidelines and demonstrated good linearity, accuracy, and precision. The range of linearity was from 1000 to 20,000 ng/mL for nirmatrelvir and 200 to 20,000 ng/mL for ritonavir with correlation coefficient values of 0.998 and 0.996, respectively. Selectivity studies revealed that no others peaks appeared in the retention times of the studied drugs. The stability of nirmatrelvir and ritonavir were also investigated through short term and three cycles of freeze-thaw, and both drugs were found stable. This analytical method could be useful for monitoring drug concentrations in patients undergoing treatment with these medications for COVID-19. In this work, for the first time, SULLME was used for the sensitive determination of nirmatrelvir and ritonavir in biological fluids. The developed method was able to determine both drugs in therapeutic levels with no need to sophisticated techniques like LC-MS. In addition to that, SULLME is considered a simple and green sample preparation in comparison with conventional sample preparation methods.

Analytical Methods for the Determination of Quercetin and Quercetin Glycosides in Pharmaceuticals and Biological Samples.

Flavonoids are plant-derived compounds that have several health benefits, including antioxidative, anti-inflammatory, anti-mutagenic, and anti-carcinogenic effects. Quercetin is a flavonoid that is widely present in various fruits, vegetables, and drinks. Accurate determination of quercetin in different samples is of great importance for its potential health benefits. This review, is an overview of sample preparation and determination methods for quercetin in diverse matrices. Previous research on sample preparation and determination methods for quercetin are summarized, highlighting the advantages and disadvantages of each method and providing insights into recent developments in quercetin sample treatment. Various analytical techniques are discussed including spectroscopic, chromatographic, electrophoretic, and electrochemical methods for the determination of quercetin and its derivatives in different samples. UV-Vis (Ultraviolet-visible) spectrophotometry is simple and inexpensive but lacks selectivity. Chromatographic techniques (HPLC, GC) offer selectivity and sensitivity, while electrophoretic and electrochemical methods provide high resolution and low detection limits, respectively. The aim of this review is to comprehensively explore the determination methods for quercetin and quercetin glycosides in diverse matrices, with emphasis on pharmaceutical and biological samples. The review also provides a theoretical basis for method development and application for the analysis of quercetin and quercetin glycosides in real samples.

The Potential Roles of Ficus carica Extract in the Management of COVID-19 Viral Infections: A Computer-Aided Drug Design Study.

INTRODUCTION: The conventional processes of drug discovery are too expensive, time-consuming and the success rate is limited. Searching for alternatives that have evident safety and potential efficacy could save money, time and improve the current therapeutic regimen outcomes. METHOD: Clinical phytotherapy implies the use of extracts of natural origin for prophylaxis, treatment, or management of human disorders. In this work, the potential role of common Fig (Ficus carica) in the management of COVID-19 infections has been explored. The antiviral effects of Cyanidin-3-rhamnoglucoside which is abundant in common Figs have been illustrated on COVID-19 targets. The immunomodulatory effect and the ability to ameliorate the cytokine storm associated with coronavirus infections have also been highlighted. This work involves various computational studies to investigate the potential roles of common figs in the management of COVID-19 viral infections. RESULTS: Two molecular docking studies of all active ingredients in common Figs were conducted starting with MOE to provide initial insights, followed by Autodock Vina for further confirmation of the results of the top five compounds with the best docking score. CONCLUSION: Finally, Molecular dynamic simulation alongside MMPBSA calculations were conducted using GROMACS to endorse and validate the entire work.

A hybrid microcrystalline cellulose/metal-organic framework for dispersive solid phase microextraction of selected pharmaceuticals: A proof-of-concept.

Solid phase microextraction (SPME) is considered simple, ecofriendly, sustainable, cost-effective and timesaving sample preparation mode in comparison with other sample preparation procedures. The researchers always try to develop new sorbents with higher surface area in comparison with other conventional sorbents aiming to enhance the extraction efficiency. In this work for the first time, a comparative study was performed between Ca-BTC MOF (1,3,5-benzenetricarboxylic acid, BTC; metal-organic framework, MOF) and a hybrid Ca-BTC-MCC MOF (microcrystalline cellulose, MCC) by using as model compounds seven drugs with different physicochemical properties. The evaluation of the extraction efficiency of both sorbents were obtained by means of an HPLC/DAD instrument configuration in reversed phase mode under isocratic elution mode. The results indicate that Ca-BTC MOF showed superior extraction efficiency than Ca-BTC-MCC MOF in the case of all analytes except nirmatrelvir and ritonavir. The results highlight that not only the surface area of adsorbents controlled the adsorption capacity, but also other factors have a role in extraction efficiency including morphology of adsorbent and physico-chemical properties of the analytes. It is worth mentioning that this is the first time that a comparative study was performed between Ca-BTC MOF and Ca-BTC-MCC MOF hybrid material.

Green microwave-prepared N and S Co-doped carbon dots as a new fluorescent nano-probe for tilmicosin detection.

A straightforward, rapid, and selective fluorescent probe for determination of tilmicosin has been developed based on novel nitrogen and sulfur co-doped CDs (NS-CD). The NS-CDs were synthesized, for the first time, through green, simple one step microwave pyrolysis in only 90 s using glucose as carbon source and l-cysteine as nitrogen and sulfur source. This proposed synthesis method was energy-efficient and resulted in NS-CDs with high production yield (54.27 wt%) and narrow particle size distribution. Greenness of NS-CDs synthesis method was assessed using EcoScale and was proven to be excellent green synthesis. The produced NS-CDs were applied as a nano-probe for determination of tilmicosin in its marketed formulation and milk based on dynamic quenching mechanism. The developed probe showed a good performance for tilmicosin detection in marketed oral solution and pasteurized milk and linearity range of 9-180 µM and 9-120 µM, respectively.

Smartphone-based point-of-care testing of the SARS-CoV-2: A systematic review.

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus's worldwide pandemic has highlighted the urgent need for reliable, quick, and affordable diagnostic tests for comprehending and controlling the epidemic by tracking the world population. Given how crucial it is to monitor and manage the pandemic, researchers have recently concentrated on creating quick detection techniques. Although PCR is still the preferred clinical diagnostic test, there is a pressing need for substitutes that are sufficiently rapid and cost-effective to provide a diagnosis at the time of use. The creation of a quick and simple POC equipment is necessary for home testing. Our review's goal is to provide an overview of the many methods utilized to identify SARS-CoV 2 in various samples utilizing portable devices, as well as any potential applications for smartphones in epidemiological research and detection. The point of care (POC) employs a range of microfluidic biosensors based on smartphones, including molecular sensors, immunological biosensors, hybrid biosensors, and imaging biosensors. For example, a number of tools have been created for the diagnosis of COVID-19, based on various theories. Integrated portable devices can be created using loop-mediated isothermal amplification, which combines isothermal amplification methods with colorimetric detection. Electrochemical approaches have been regarded as a potential substitute for optical sensing techniques that utilize fluorescence for detection and as being more beneficial to the Minimizing and simplicity of the tools used for detection, together with techniques that can amplify DNA or RNA under constant temperature conditions, without the need for repeated heating and cooling cycles. Many research have used smartphones for virus detection and data visualization, making these techniques more user-friendly and broadly distributed throughout nations. Overall, our research provides a review of different novel, non-invasive, affordable, and efficient methods for identifying COVID-19 contagious infected people and halting the disease's transmission.

Effect of hydrophilic/lipophilic balance on the porogenic properties of non-ionic surfactants for monolith preparation and chromatographic separation.

The effect of hydrophilic/lipophilic balance (HLB) of polyoxyethylene ethers of different chain lengths on the microporogenic properties of the Brij surfactants has been studied. The objective of this work is to help better understand the role of each porogen and to set criteria for selecting the proper non-ionic surfactant, based on the HLB value. Seven recipes of different porogen compositions were first prepared and the highest efficiency was achieved using decane/decanol/dodecanol mixture with Brij® 30. Then, four other Brij surfactants covering the entire HLB scale were tested, and the prepared monoliths were characterized by SEM, BET, FT-IR and chromatography. The results showed that increasing the HLB from 9.72 to 18.84 was accompanied by an increase in monolith density and surface areas. The optimum HLB range was found to be 10 to 15. Surfactants of lower HLB formed either nonporous or less efficient columns, while those of higher HLB formed non-permeable columns. Adjusting the HLB was possible by mixing surfactants of different HLB. The prepared monoliths could be used in the isocratic mode with a mobile phase consisting of a mixture of ACN and water (20:80, v/v) at a flow rate of 1.5 µL min-1 to separate five sulfa drugs. The separation results showed that the elution order of the compounds correlated with their lipophilicity, with sulfamerazine (logp = 0.52) being the first to elute, and sulfaquinoxoline (logp=1.70) being the most retained. The asymmetry factors of the separated compounds ranged between 1.18 and 1.25, and the resolution was found to be in the range 2.92-7.80. The prepared monoliths could be also successfully separate a mixture of four different nonsteroidal anti-inflammatory drugs and a mixture of four benzoic acid derivatives. This work assists in optimizing the surfactant-based porogenic mixture to meet the desired porosity, surface area, morphology and chromatographic separation requirements.

Google Trends as a predictive tool in the era of COVID-19: a scoping review.

Google Trends has been extensively used in different sectors from finance to tourism, the economy, fashion, the fun industry, the oil trade, and healthcare. This scoping review aims to summarize the role of Google Trends as a monitoring and a predicting tool in the COVID-19 pandemic. Inclusion criteria for this scoping review were original English-language peer-reviewed research articles on the COVID-19 pandemic conducted in 2020 using Google Trends as a search tool. Articles that were in a language other than English, were only in abstract form, or did not discuss the role of Google Trends during the COVID-19 pandemic were excluded. According to these criteria, a total of 81 studies were included to cover the period of the first year after the emergence of the crisis. Google Trends can potentially help health authorities to plan and control pandemics earlier and to decrease the risk of infection among people.

Microwave prepared nitrogen and sulfur co-doped carbon quantum dots for rapid determination of ascorbic acid through a turn off-on strategy.

A simple and eco-friendly microwave method was applied for the preparation of highly fluorescent nitrogen and sulfur co-doped carbon quantum dots (NS-CQDs) and used for the determination of ascorbic acid (ASC) in pharmaceutical dosage forms. The prepared NS-CQDs had bright blue fluorescence at a maximum emission wavelength of 440 nm, after excitation with 350 nm, with a quantum yield of 62.5 %. The developed NS-CQDs were prepared from citric acid and l-cysteine in one minute. The native fluorescence of NS-CQDs was quenched by ferric ions due to the formation of non-fluorescent CQDs/ Fe3+ complex. The quenched fluorescence could be restored by the addition of ASC due to the reducing properties of ASC which converts Fe3+ to Fe2+. The method was found linear over the concentration range of 2.0-100 µg/mL, with a limit of detection was 0.6 µg/mL and a coefficient of determination of 0.9965. The proposed method was cross-validated and statistically compared with a reported HPLC method. The results indicated that the developed method was greener, according to the analytical eco-scale and the green analytical procedure index (GAPI). The prepared NS-CQDs were used for spectrofluorometric determination of ASC in pharmaceutical dosage forms, with percentage recoveries ranging between 98 and 102 %, and relative standard deviations less than 2 %. The method was easy, rapid, reliable, and sensitive and did not require expensive reagents or sophisticated equipment.

Determination of Monosodium Glutamate in Noodles Using a Simple Spectrofluorometric Method based on an Emission Turn-on Approach.

A simple, fast, and ecofriendly spectrofluorometric method was developed and validated for determination of mono sodium glutamate (MSG). The method depended on the reaction between MSG and iron (III) salicylate based on ligand exchange mechanism. Addition of MSG turned-on the fluorescent response of iron (III) salicylate at λem 411 nm. Reaction conditions including reagent concentration, pH, and time were optimized. The method was validated regarding the ICH guidelines. The method determined MSG within the linearity range of 25-250 µM with a coefficient of determination of 0.9967 and a calculated limit of detection of 1.73 µM. Furthermore, the developed method was successfully applied for the determination of MSG in food preparation (instant noodles). The results were compared to those obtained by a published HPLC method using t-test and F-test at 95% confidence interval; no statistically significant difference was found. Based on the analytical Eco-scale and the green analytical procedure index (GAPI), the developed method was assessed to be greener than the published HPLC method. The developed method offered advantages over other spectrophotometric reported methods and was convenient for routine determination of MSG in foodstuffs.

A Gadolinium-Based Magnetic Ionic Liquid for Dispersive Liquid-Liquid Microextraction of Ivermectin from Environmental Water.

The recently introduced gadolinium-based magnetic ionic liquid (Gd-MIL) has been exploited as an extractant in dispersive liquid-liquid microextraction (DLLME) for preconcentration of ivermectin (IVR) from water samples followed by analysis using reversed-phase HPLC with UV detection at 245 nm. The utilized Gd-MIL extractant is hydrophobic with markedly high magnetic susceptibility. These features result in an efficient extraction of the lipophilic analyte and facilitate the phase separation under the influence of a strong magnetic field, thus promoting the method sensitivity and increasing the potential for automation. To maximize the IVR enrichment by DLLME, the procedure was optimized for extractant mass, dispersive solvent type/volume, salt addition and diluent pH. At optimized conditions, an enrichment factor approaching 70 was obtained with 4.0-mL sample sizes. The method was validated in terms of accuracy, precision, specificity and limit of quantitation. The method was successfully applied to the determination of IVR in river water samples with a mean relative recovery of 97.3% at a spiked concentration of 400 ng/mL. Compared with other reported methods, this approach used a simpler procedure with improved precision, lower amounts of safer solvents and a short analysis time.

Redox-Based Colorimetric Sensor for the Selective Determination of Ascorbic Acid in Fixed-Dose Combination Tablets.

BACKGROUND: Ascorbic acid (ASC; vitamin C) is a weak chromophore, so its presence cannot be determined directly by spectrophotometry. OBJECTIVE: This work aims to develop and validate a simple and ecofriendly analytical method for the determination of ASC concentration based on the reaction of ASC with the metal complex, ferric salicylate. METHODS: The visible absorbance of ferric salicylate was found to be inversely proportional to the concentration of ASC. The possible mechanism of the reaction between ASC and ferric salicylate was investigated: ferric salicylate was found to be reduced by ASC under the applied experimental conditions. Different parameters that may affect the reaction were also investigated: ferric salicylate concentration, pH, ionic strength, and the time of reaction. The optimum concentration of ferric salicylate was found to be 1000 µM and the optimum pH was 5.5. The developed method was validated according to International Conference on Harmonization (ICH) guidelines. RESULTS: The linearity range of the developed method was 5-70 µg/mL and the correlation coefficient was 0.9994. The limits of detection and quantitation were 0.38 µg/mL and 1.16 µg/mL, respectively. The method was successfully applied to the determination of ASC concentration in commercial Ruta-C60® tablets. The mean recovery ± standard deviation was found to be 101.10 ± 0.70%. The results were statistically compared to those obtained by a reported HPLC method. Good agreement was observed. CONCLUSION: The developed method is simple, fast, cost-effective, and suitable for routine pharmaceutical analysis of ASC. HIGHLIGHTS: The developed method is more sensitive than the other spectrophotometric methods reported for determination of ASC.

Innovative spectrofluorimetric determination of vildagliptin based on a "switch off/on" NS-doped carbon dot nanosensor.

A simple, fast, and green one-step microwave pyrolysis approach was proposed for the synthesis of highly fluorescent nitrogen/sulfur-doped carbon dots (NS-CDs). The proposed NS-CDs were prepared in only one minute from citric acid and thiosemicarbazide. In the presence of Cu2+, the fluorescence of NS-CDs was significantly quenched ("turn off") through the formation of a non-fluorescent NS-CDs/Cu2+ complex. This designed sensor could be applied for label-free determination of vildagliptin based on the competition between vildagliptin and the functional groups on NS-CDs for Cu2+ complexation, and hence NS-CD fluorescence recovery ("turn on"). Under the optimized conditions, the developed probe (NS-CDs/Cu2+) demonstrated a good sensing performance for vildagliptin with linearity in the range of 45-240 µM and a detection limit of 13.411 µM. Owing to its sensitivity, this sensor was successfully applied for vildagliptin determination in human urine samples.

Spectroscopic methods for COVID-19 detection and early diagnosis.

The coronavirus pandemic is a worldwide hazard that poses a threat to millions of individuals throughout the world. This pandemic is caused by the severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2), which was initially identified in Wuhan, China's Hubei provincial capital, and has since spread throughout the world. According to the World Health Organization's Weekly Epidemiological Update, there were more than 250 million documented cases of coronavirus infections globally, with five million fatalities. Early detection of coronavirus does not only reduce the spread of the virus, but it also increases the chance of curing the infection. Spectroscopic techniques have been widely used in the early detection and diagnosis of COVID-19 using Raman, Infrared, mass spectrometry and fluorescence spectroscopy. In this review, the reported spectroscopic methods for COVID-19 detection were discussed with emphasis on the practical aspects, limitations and applications.

A Critical Review of Analytical Applications of Chitosan as a Sustainable Chemical with Functions Galore.

Biomass and biowastes stand as sustainable and cost-effective environmentally benign alternative feedstock. Chitosan is a biocompatible, bioactive, and biodegradable biopolymer derived from chitin to achieve eight aspects out of the 12 green chemistry principles. Chitosan got significant attention in several fields including chemical analysis, in addition to chemical functionally, which enabled its use as adsorbent and its structural crosslinking using various crosslinkers. The physicochemical, technological, and optical properties of chitosan have been extensively exploited in analysis. Mainly, deacetylation degree and molecular weight are controlling its properties and hence controlling its functions. This review presents a structure, properties, and functions relationships of chitosan. It also aims to provide an overview of the different functions that chitosan can serve in each analytical technique such as supporting matrix, catalyst…etc. The contribution of chitosan in improving the ecological performance is discussed in each technique.

Development of stability indicating reversed-phase high-performance liquid chromatography method for determination of elobixibat in pure form and laboratory prepared tablets: Application to dissolution study.

A simple stability-indicating reversed-phase high-performance liquid chromatography method has been developed for determination of elobixibat in presence of its potential impurities and degradation products. The chromatographic separation was carried on a Thermo scientific Base Deactivated Silica BDS Hypersil-C18 (150 × 4.6 mm; 5 µm) column using a mobile phase of acetonitrile and phosphate buffer (25 mM, pH 2.5) in a ratio of (70:30, v/v). The experimental conditions were accurately investigated, and the method was validated according to ICH guidelines Q2 (R1). The drug was subjected to various stress conditions including acidic, basic, oxidative, and photolytic conditions. The method successfully separates the drug from the three reported impurities and different degradants. The method was also successfully applied for the determination of elobixibat in laboratory prepared tablets (5.0 mg). Analysis shows no interference from excipients and degradation products. The method was also applied for performing in vitro dissolution testing of elobixibat laboratory prepared tablets. Since elobixibat is recently introduced into the market, there are no previous stability studies and no reported analytical methods for its determination. Thus, this study presents a validated and selective method that can be effectively employed in routine quality control studies.